Question no 1808 : SAP customer

The first customer of SAP was ____________ .

(only one answer)

A)       Volkswagen.
B)       BMW.
C)       J.C. Penny.
D)       ICI.
E)       Toyota.
.

Question no 1807 : SAP

In 1972, 5 former IBM employees ________, _______, _________, _________, and ___________ launch a company called SAP.

(only one answer)

A)     Mary Anderson, Dietmar Hopp, Claus Wellenreuther, Klaus Tschira, and Hans-Werner Hektor.
B)     Hasso Plattner, Dietmar Hopp, Claus Wellenreuther, Klaus Tschira, and Charles Bens.
C)     Hasso Plattner, Henry Cooper, Claus Wellenreuther, Klaus Tschira, and Hans-Werner Hektor.
D)     Hasso Plattner, Dietmar Hopp, John Doe, Klaus Tschira, and Hans-Werner Hektor.
E)     Hasso Plattner, Dietmar Hopp, Claus Wellenreuther, Klaus Tschira, and Hans-Werner Hektor.
.

Question no 1806 : Changing Material Type

In SAP MM ECC6.0, EhP1, the Material Type of a material master can be changed provided the following:

(more then one answers)

A)    No stocks exists.
B)    No outstanding purchase order exists.
C)    No reservations outstanding.
D)    No purchase info record exists.
E)    No source list for the material exists.
.

Question no 1805 : Special material type feature using material type

In SAP MM ECC6.0 ehP1, which of the following special material type feature are configured via the material type configuration ?

(more then one answers)

A)     material is configurable.
B)     returnable transport packaging.
C)     consignment mandatory.
D)     pipeline mandatory.
E)     manufacturer part.
.

Question no 1804 : Material type for Maintenance Assembly

In SAP PM ECC6.0, which of the following standard material type is used for Maintenance Assembly ?

(only one answer)

A)    HALB.
B)    FHMI.
C)    ERSA.
D)    IBAU.
E)    HAWA.
. 

Question no 1803 : Transacation type for Material Document Number Range

In SAP MM ECC6.0 EhP3, the Transaction type "IN" is used for which type of Physical Inventory document scenario ?

(only one answer)

A)    for Physical inventory documents.
B)    for Physical inventory documents for counts and differences without reference.
C)    for Physical inventory documents for recounts.
D)    for Physical inventory documents for counts without reference.
E)    for Physical inventory documents for difference postings (in WM).
.

Question no 1802 : Number Range for Reservations

In SAP MM ECC6.0 EhP4, the Number Range for the Manual Reservations created in Material Management is configured at which organizational level ?

(only one answer)

A)    Plant.
B)    Company code.
C)    Company code and Year.
D)    Plant and Year.
E)    None of the above.
.

Question no 1801 : Possible Physical Inventory Steps

In SAP MM ECC 6.0 EhP1, which of the following options are available if you wish to create or combine steps in the phyisical inventory process ?

(more then one answers)

A)    Create Physical Inventory document manually.
B)    Create Physical Inventory document using a batch session.
C)    Enter Count Result and Physical Inventory document creation within one step.
D)    Enter Count Result, Physical Inventory document creation, and Post difference within one step.
E)    Enter Count Result and Post difference in one step for a previously created Physical Inventory document.
.

Question no 1800 : Tolerance Key for Posting Inventory Difference

In SAP MM ECC6.0 EhP2, which of the following organization structure is assigned with the tolerance key for controlling the physical inventory difference posting ?

(only one answer)

A)    Controlling area.
B)    Company code.
C)    Plant.
D)    Purchase Organization.
E)    Material type.
.

Question no 1799 : Posting the Inventory Difference

In SAP MM ECC6.0, EhP2, You can define tolerances for the posting of inventory differences for a user in Customizing for Physical Inventory. What are the possible tolerance control ?

(more then one answers)

A)   Difference amount per storage location.
B)   Difference amount per physical inventory document.
C)   Difference amount per physical inventory document item.
D)   Difference amount per material type per physical inventory document.
E)   Difference amount per material group per physical inventory document.
.

Question no 1798 : Consignment Stock Processing

In SAP MM ECC6.0, select the following characteristics that describes wrongly the Consignment scneario in the standard system delivered by SAP ?

(more then one answers)

A)    It is possible to create a Consignment Purchase Order without the Consignment Info Record.
B)    The Pricing condition folder shows a "zero" price for condition type "PR00" for the item.
C)    Account Assignment entry is not possible for Consignment Purchase Order.
D)    There is no selection of GR non-valuated indicator for the Consignment item in the PO.
E)    It is not possible to indicate to receive to QI stock type for the Consignament item in the PO.
.

Question no 1797 : Subcontracting stock types

In SAP MM ECC6.0 EhP4, which of the following are standard stock types for stocks provided to the vendor EXCEPT ?

(only one answer)

A)    Unrestricted stock.
B)    Quality Inspection.
C)    Restricted use.
D)    ST stock for SC.
E)    Block stock.
.

Question no 1796 : Subcontracting Subsequent Adjustment

In SAP MM ECC6.0 EhP2, the adjustment of extra uses of components by the subcontractor can be done using either t-code MB04 or MIGO_GS, which reference document is possible for the adjustment ?

(only one answer)

I)    Purchase Order.
II)   Reservations.
III)  Others.

A)    I only.
B)    I, II.
C)    II, III.
D)    I, II, III.
E)    III only.
.

Question no 1795 : Stock Transport Order Characteristics

In SAP MM ECC6.0, consider the following scenario and answer the question.

Plant 1, "MAP Price" @ $10/pc with current quantity of 100, Total Stock cost $1000
Plant 2, "Standard Price" @ $20/pc with current quantity of 100, Total Stock cost $2000

The STPO is created by Plant 2 for 10 pcs. (Plant 2 is the receiving Plant).
During goods receipt, which of the following accounting entries is expected ?

(only one answer)

A)    Debit stock (plant 1) $100, Credit stock (plant 2) $100.
B)    Debit stock (plant 2) $100, Credit stock (plant 1) $100.
C)    Debit stock (plant 2) $200, Credit stock (plant 1) $200.
D)    Debit stock (plant 1) $200, Credit stock (plant 2) $100, Credit Gain in Stock $100.
E)    Debit stock (plant 2) $200, Credit stock (plant 1) $100, Credit Gain in Stock $100.
.

Question no 1794 : Stock Transport Order Characteristics

In SAP MM ECC6.0, consider the following scenario and answer the question.

Plant 1, "MAP Price" @ $10/pc with current quantity of 100, Total Stock cost $1000
Plant 2, "Standard Price" @ $20/pc with current quantity of 100, Total Stock cost $2000

What price condition is recorded in the STPO where Plant 2 creates it. (Plant 2 is the receiving Plant) ?

(only one answer)

A)     Info record from Plant 1.
B)     Info record from Plant 2.
C)    $10 per unit.
D)    $20 per unit.
E)     No Price condition in STPO.
. 

Question no 1793 : PM Master Data Construction Type

TERP10 Quiz Unit 09 Enterprise Asset Management and Customer Service

The purpose of the Construction Type is to ____________________________ .

I)        assign a material BOM to Functional Location.

II)       assign a material BOM to a Maintenance Task List.

III)      assign a material BOM to an Equipment.

IV)      assign a material BOM to a Maintenance Plan.

A)       I, III.
B)       I, II, III.
C)       II, III.
D)       II, III, IV.
E)        I, II, III, IV.

.

Question no 1792 : PM Master Data Construction Type

PLM300 Plant Maintenance
Unit 03 Technical Objects

The Construction type field in the Equipment master stores the _____________ .
(only one answer)

(A)  Maintenance Plan for the Equipment.
(B)  Construction Category
(C)  Functional Location.
(D)  Work Center.
(E)  Material Master of a BOM Header.
.

Question no 1791 : Organization in MM

In SAP MM Organizational Structuring, which of the following organizational structuring in the customization is correct ?

(more then one answers)

A)    A plant assignment to a purchasing organization is mandatory for purchasing to take place.
B)    A purchasing organization must be assigned to a company code for purchasing execution.
C)    At least one purchasing group must be assigned to a purchasing organization.
D)    More then one purchasing organization can be assigned to a Plant.
E)    Several plants can be assigned to the same purchasing organization.

Question no 1790: LDM Super BOM

TERP10 Quiz Unit 05 Life Cycle Data Management


The rules which are used to select the correct component from super BOM based on a customer requirement is called ?

(only one answer)

A)   Object dependencies.
B)   Classification.
C)   Engineering workbench.
D)   Variant Configuration.
E)   Configurable BOM.
.

Question no 1789 : Material Material QM view and Inspection Plan MIC

In SAP QM ECC6.0, which of the following QM master data element can be assigned to both to the Inspection type folder in the QM view of the Material Master as well as the inspection characteristics in the Inspection Plan ?

(more then one answers)

A)    Inspection Method.
B)    Sampling Procedure.
C)    Dynamic Modification Rule.
D)    Catalog.
E)    QM Order.
.

Question no 1788 : Dynamic Modification Assignment

In SAP QM ECC6.0, the Dynamic Modification Rule can be assigned to which object in the SAP QM module ?

(more then one answers)

A)    Material Master QM view's Inspection type assignment folder.
B)    Master Inspection Characteristics.
C)    Inspection Plan Header
D)    Inspection Plan operation detail where the Master Inspection Characteristics are assigned.
E)    Inspection Method.
.

Question no 1787 : Sampling Procedure requirement

In SAP QM ECC6.0, the requirement of entry of Sampling Procedure for the Master Inspection Characteristics in the Inspection Plan is determined by which of the following ?

(only one answer)

A)   Inspection Plan profile.
B)   Quality Control Key assigned to the Inspection Plan Operation.
C)   Master Inspection Characteristics itself.
D)   Indicator in the Inspection Plan Header.
E)   Inspection Plan type used to create the Inspection Plan.
.

Question no 1786 : Mandatory in Inspection Lot Release

In SAP QM ECC6.0, which of the following is mandatory for the Release of an Inspection Lot ?

(only one answer)

A)   Inspection method. 
B)   Approval of Goods Receipt in MM.
C)   Dynamic modification.
D)   Inspection plan.
E)   Sample size.
.

Question no 1785 : QM Master Data Customizing

In SAP QM ECC6.0, which of the following data element in QM customizing cannot be used defined ?

(only one answer)

A)    Inspection type.
B)    Inspection lot origin.
C)    Sampling procedure.
D)    Dynamic modification rule.
E)    Catalog type.
.

Question no 1784 : Inspection type in the Material Master

In SAP QM ECC6.0, which of the following are NOT TRUE about Inspection type assignment in the Material Master ?

(more then one answers)

A)    More then one Inspection types with the same origins can be assigned to a material master in the same plant.
B)    Multiple inspection types can be assigned the material master but there must be different inspection origins.
C)    New inspection types cannot be added to the QM view once a material master is first created.
D)    Once an inspection type is activated in the QM view of the material, it should not be de-activated until all inspection lot and QI stocks are cleared.
E)     Assignment of the sampling procedure in the inspection type in the material master is mandatory.
.

Question no 1783 : Objects assignment to Inspection type

In SAP QM ECC6.0, which of the following can be assigned to the Inspection type in the QM view of the Material Master ?

(more then one answers)

A)    Sampling Procedure.
B)    Inspection Method.
C)    Inspection Plan.
D)    Dynamic Modification Rule.
E)    QM order number.
.

Question no 1782 : Sample Procedure Assignment

In SAP QM ECC6.0, the Sample Procedure can be assign to which of the following ?

(more then one answers)

A)     Inspection Plan Header.
B)     Master Inspection Characteristics.
C)     Material Master Inspection type assigned in the QM view.
D)     Material Master QM view's procurement data view.
E)     Inspection Characteristics assignment in the Inspection Plan operations.
.

Question no 1781 : Inspection Recording

In SAP QM ECC6.0, which of the following statement is TRUE about Inspection Recording for an inspection lot ?

(only one answers)

A)     Results Recording is always mandatory for an inspection lot.
B)     Defect Recording is always mandatory for an inspection lot.
C)     Both Results Recording and Defects Recording depending on the Inspection Type.
D)     Due to integration to the Logistics Supply Chain, an inspection lot is always automatically generated and not possible to be manually created.
E)     An inspection lot is created only for one material or several materials in each inspection lot.
.

Question no 1780 : Inspection Lot

In SAP QM ECC6.0, you will be able to find which of the following information in an Inspection Lot document ?

(more then one answers)

A)    Related material document.
B)    Inspection Task list to be used.
C)    Quality Level.
D)    Sample size.
E)    Vendor and Customer if relevant.
.

Question no 1779 : Configuration of Inventory Management at Movement Type

In SAP MM Inventory Management as at ECC6.0, which of the following configuration are setup using the Movement Type ?

(more then one answers)

A)    Record Reasons for Goods Movement.
B)    Expiration Date Check.
C)    Set Delivery Complete Indicator.
D)    Create Purchase Order Automatically.
E)    Set Tolerance Limit of Goods Receipt.
.

Question no 1778 : Inventory Management Configuration

In SAP MM ECC6.0, which of the following Inventory Management Configuration are Plant dependent ?

(more then one answers)

A)    Expiration Date Check.
B)    Create Purchase Order Automatically.
C)    Create Storage Location Automatically.
D)    Set Delivery Completed Indicator.
E)    Record Reasons for Goods Movement.
.