Sunday, July 30, 2017
Saturday, July 29, 2017
Thursday, July 27, 2017
Question no 3413 : ESTO
In SAP PM as at ECC6.0 EhP6, which of the following is TRUE of the system status "ESTO" in Plant Maintenance Technical Object ?
(more than one answers)
A) If can only be found in Functional Location master and not Equipment master.
B) If can be found in both Functional Location master and Equipment master.
C) If can be found only in Equipment master and not in Functional Location master.
D) It means that the Technical Object is likely linked to a Material-Serial number.
E) The Equipment is now in the warehouse.
.
Answer: C, D, E
ESTO means in the Warehouse, and only for EQ that is linked to Material-Serial.
(more than one answers)
A) If can only be found in Functional Location master and not Equipment master.
B) If can be found in both Functional Location master and Equipment master.
C) If can be found only in Equipment master and not in Functional Location master.
D) It means that the Technical Object is likely linked to a Material-Serial number.
E) The Equipment is now in the warehouse.
.
Answer: C, D, E
ESTO means in the Warehouse, and only for EQ that is linked to Material-Serial.
Wednesday, July 26, 2017
Question no 3412 : Stock movement without financial posting
In SAP MM IM as at ECC6 EhP6, which of the following inventory movement generally do not result in Accounting Postings?
(more than one answers)
A) Goods Receipt "101" of Consignment Purchase Order.
B) Goods Receipt "101" of Subcontracting Purchase Order.
C) Goods Issue "201" of Pipeline Stocks.
D) Stock Transfer "541" of own stock to Subcontractor.
E) Goods Receipt "103" of PO into GR-Blocked Stock.
Answer: A, D, E
A) Consignment receiving is not valuated stock until GI or transfer to own stock.
D) Stocks at the Subcontractor are Valuated at the Plant level, transfer from SLoc to Plant level for this type of stock do not result in Accounting entries.
E) GR-Block Stock via 103 are not Valuated. (so if use 15 then it is Valuated)
(more than one answers)
A) Goods Receipt "101" of Consignment Purchase Order.
B) Goods Receipt "101" of Subcontracting Purchase Order.
C) Goods Issue "201" of Pipeline Stocks.
D) Stock Transfer "541" of own stock to Subcontractor.
E) Goods Receipt "103" of PO into GR-Blocked Stock.
Answer: A, D, E
A) Consignment receiving is not valuated stock until GI or transfer to own stock.
D) Stocks at the Subcontractor are Valuated at the Plant level, transfer from SLoc to Plant level for this type of stock do not result in Accounting entries.
E) GR-Block Stock via 103 are not Valuated. (so if use 15 then it is Valuated)
Saturday, July 22, 2017
SAP Genisys Project
Soon SAP will be connected to
... your Phone,
... your Tablet,
... your Car,
... your House,
... your Shoes,
... your Watch,
... your Cooking utensils,
... your Bathroom,
... your Bed,
... your Toilet.
... your TV,
... your Chair,
... the Pillow you rest your head ....
SAP will be part of your life.
Friday, July 21, 2017
Question no 3411 : Valuation Type in Plant Maintenance
In SAP PM as at ECC6 EhP6, which of the following are correct about use of Valuation Type ?
(more than one answers)
A) It can have price control "V" or "S".
B) Price control can only be "V".
C) Price can be zero.
D) Each valuation type can have a different valuation class.
E) Valuation Type can be viewed in the Equipment Master data view.
.
Answer: A, B, C, D, E
All of the above via Material Accounting view or Equipment Serial view.
(more than one answers)
A) It can have price control "V" or "S".
B) Price control can only be "V".
C) Price can be zero.
D) Each valuation type can have a different valuation class.
E) Valuation Type can be viewed in the Equipment Master data view.
.
Answer: A, B, C, D, E
All of the above via Material Accounting view or Equipment Serial view.
Thursday, July 20, 2017
Question no 3410 : Using Split Valuation in Plant Maintenance
In SAP PM as at ECC6.0 EhP6, Split Valuation can be used to define Master data for the following scenario in Plant Maintenance
(more than one answers)
A) Spare parts valuation type without serial number but without equipment link.
B) Spare parts valuation type with serial number but without equipment link.
C) Material with serial number link to equipment number for the valuation type.
D) Material without serial number link but link the valuation type to equipment masters.
E) Material with serial number link to function location for the valuation type.
.
Answer: A, B, C
D) without serial, a material cannot be reference with an autonomous equipment.
E) functional location cannot link to serial number
as at ECC6.0 EhP6
(more than one answers)
A) Spare parts valuation type without serial number but without equipment link.
B) Spare parts valuation type with serial number but without equipment link.
C) Material with serial number link to equipment number for the valuation type.
D) Material without serial number link but link the valuation type to equipment masters.
E) Material with serial number link to function location for the valuation type.
.
Answer: A, B, C
D) without serial, a material cannot be reference with an autonomous equipment.
E) functional location cannot link to serial number
as at ECC6.0 EhP6
Wednesday, July 19, 2017
Question no 3409 : MM data structure for a Plant
In SAP MM as at ECC6.0 EhP6, which of the following data structure in SAP MM allows the association to the plant level data ?
(more than one answers)
A) Purchasing Info Record.
B) Vendor Master Purchasing data view.
C) Quota Arrangement.
D) Source List.
E) Approved Vendor List.
.
Answer: A, B, C, D, E
A) PIR is optional but possible.
B) Vendor Master is optional but possible if the Account Group was set to allow sub-range at Plant.
C) Quota Arrangement must always be created at Plant level.
D) Source List must always be created at Plant level.
E) Approved Vendor list for MPN material's Plant field is optional but possible.
Sunday, July 16, 2017
Question no 3408 : Purchasing Organization in MM Master Data
In SAP MM as at ECC6.0 EhP6, the Purchasing Organization is used in creating which of the following Master Data in SAP MM ?
(more than one answers)
A) Material Master.
B) Vendor Master.
C) Purchasing Info Record.
D) Source List.
E) Quota Arrangement.
.
Answer: B, C, D
A) Pur.Org is never used in creating an data view in the Material Master.
B) Pur.Org data view in Vendor Master is necessary if Vendor is to be used in the Procurement process.
C) Pur.Og is mandatory of PIR (Plant is Optional).
D) Source List initial screen with Plant mandatory but the Source List item in the detail screen always require the Pur.Org for External Procurement.
E) Quota Arrangement has no entry requirement for Pur.Org, only the Plant and Vendor.
(more than one answers)
A) Material Master.
B) Vendor Master.
C) Purchasing Info Record.
D) Source List.
E) Quota Arrangement.
.
Answer: B, C, D
A) Pur.Org is never used in creating an data view in the Material Master.
B) Pur.Org data view in Vendor Master is necessary if Vendor is to be used in the Procurement process.
C) Pur.Og is mandatory of PIR (Plant is Optional).
D) Source List initial screen with Plant mandatory but the Source List item in the detail screen always require the Pur.Org for External Procurement.
E) Quota Arrangement has no entry requirement for Pur.Org, only the Plant and Vendor.
Saturday, July 15, 2017
The secrets of SAP success
Everyone you speak to, to some level have a lot of "negative" stuff to talk about SAP. It did seem that almost if not all who had implemented it say it is a German Product that "sucks" and they have "suffered" to have been part of the project or using it. Every Consultant (including those making a lot of money out of it) will all continue say how "bad" the software is.
But why is SAP still around ? Where is PeopleSoft, Baan, Oracle, JD Edwards, I don't keep up with the news of the SAP competitors but SAP seems to be always consistently among if not at the top in Gardner Reports. Every week on Friday at the Training Center, there are consistently at least 20-40 people taking SAP Certification Exam, so many out there aspire to be the next SAP Consultant making it big.
Why are the companies been "sucked" into SAP is still using it ?
Because they cannot get out of it.
A lot of big companies plunged into SAP at "their good times", at this present Global Economic situation, to re-implement something else is not easy. Put it this way, SAP is never really an off-the-shelf package that fits different business, all companies using SAP have really spend a lot of resources enhancing the system to fit their needs. It is just impossible to switch it off and do something else.
Why are consultants who say they hated the software still in it ?
Because of money and they cannot get enough of it.
A Factory Manager likely only makes $6k to $8k MYR (average), in Malaysia, do you know how much responsibility a Factory Manager holds? An SAP consultant makes $6k - $10 MYR (average), do you think that the responsibilities of the SAP consultant is higher than the Factory Manager! Relatively speaking, the Job of an SAP consultant is really much easier. It is really true as it is SAP consulting is just matching what customer wants, if it cannot be done, just do enhancement via ABAP, that's it. So, although SAP Consultant "bitch" about the software, they are all still in it because of the MONEY.
Everyone saying "BAD" things about SAP is still in one way or another working within part of the SAP ECO-system all because there are a lot more MONEY to make doing SAP rather than doing something else.
Thursday, July 13, 2017
Question no 3407 : Organizational Element in creation of Material Master
In SAP MM as at ECC6.0 EhP7, which of the following are NOT Organization Elements for creation of the Material Master ?
(only one answer)
A) Sales Organization.
B) Purchasing Organization.
C) Plant.
D) Company Code.
E) Warehouse.
.
Answer: B
A) Sales Organization is used to create the Sales Data views 1, 2.
B) Purchasing Data view is created a the Plant level (and not Purchasing Organization).
C) Plant data views includes Purchasing, MRP, Work Scheduling, Forecasting, Accounting, QM etc.
D) Company Code is relevant when the system is first initialized the Valuation Level at Company Code level, and its for the Accounting data view.
E) WM data view is created at the Warehouse Number level.
.
(only one answer)
A) Sales Organization.
B) Purchasing Organization.
C) Plant.
D) Company Code.
E) Warehouse.
.
Answer: B
A) Sales Organization is used to create the Sales Data views 1, 2.
B) Purchasing Data view is created a the Plant level (and not Purchasing Organization).
C) Plant data views includes Purchasing, MRP, Work Scheduling, Forecasting, Accounting, QM etc.
D) Company Code is relevant when the system is first initialized the Valuation Level at Company Code level, and its for the Accounting data view.
E) WM data view is created at the Warehouse Number level.
.
Wednesday, July 12, 2017
Monday, July 10, 2017
Question no 3406 : Inspection Plan Characteristics
In SAP QM as at ECC6.0 EhP7, which of the following are the Correct Characterization of an Inspection Plan ?
(more than one answers)
A) An Inspection Plan cannot be saved without a Plant.
B) An Inspection Plan cannot be saved without assigned a Material.
C) An Inspection Plan can be assigned to one or more Materials.
D) An Inspection Plan can be assigned to one or more Plants.
E) More than One Inspection Plan can be created for the same Material.
.
Answer: A, C, E
A,D) An Inspection Plan must be saved for a Plant. The Inspection Plans are Plant dependent.
B,C) An Inspection Plan can be saved without a Material assignment. Later, the Inspection Plan then be assigned to one of more Materials in QP02.
E) Via the Counter, the Inspection Plan can be created for the same Material. Hence the same Material can be assigned to one or more Inspection Plans for the same Plant.
(more than one answers)
A) An Inspection Plan cannot be saved without a Plant.
B) An Inspection Plan cannot be saved without assigned a Material.
C) An Inspection Plan can be assigned to one or more Materials.
D) An Inspection Plan can be assigned to one or more Plants.
E) More than One Inspection Plan can be created for the same Material.
.
Answer: A, C, E
A,D) An Inspection Plan must be saved for a Plant. The Inspection Plans are Plant dependent.
B,C) An Inspection Plan can be saved without a Material assignment. Later, the Inspection Plan then be assigned to one of more Materials in QP02.
E) Via the Counter, the Inspection Plan can be created for the same Material. Hence the same Material can be assigned to one or more Inspection Plans for the same Plant.
Saturday, July 8, 2017
Wednesday, July 5, 2017
Question no 3405 : Versions in Quality Management Master Data
In SAP QM as at ECC6.0 EhP7, which of the following QM Master Data can be created or extended with Versions ?
(more than one answers)
A) Master Inspection Characteristics.
B) Sampling Procedure.
C) Sampling Scheme.
D) Dynamic Modification Factor.
E) Inspection Method.
.
Answer: A, E
QS22 Master Inspection Characteristics (note version)
QS32 Inspection Method (note version)
(more than one answers)
A) Master Inspection Characteristics.
B) Sampling Procedure.
C) Sampling Scheme.
D) Dynamic Modification Factor.
E) Inspection Method.
.
Answer: A, E
QS22 Master Inspection Characteristics (note version)
QS32 Inspection Method (note version)
Monday, July 3, 2017
Question no 3404 : Inspection Method
In SAP QM as at ECC6.0 EhP7, which of the following are Correct about Inspection Method ?
(more than one answers)
A) Inspection Method is create a the Plant level.
B) Inspection Method is always create without a Plant.
C) Inspection Method can be created with difference Versions.
D) Inspection Method can be deleted.
E) Inspection Method can be changed with Engineering Change Management.
.
Answer: A, C, D
A,B) QS31 do not show plant when you create the Inspection Method, but when accessing in QS33 and QS34, the Plant field is present. To create an Inspection Method for a different plant, in QS31, enter the Plant field in the Reference Segment in the initial screen.
C) QS32 is to enter a different key date for the Inspection Method which the system will create the Inspection Method using the key date for a different Version.
D) QS35 is to delete an Inspection Method for a particular version.
E) QS32, QS33, QS34 do not have any field for Engineering Change Number.
(more than one answers)
A) Inspection Method is create a the Plant level.
B) Inspection Method is always create without a Plant.
C) Inspection Method can be created with difference Versions.
D) Inspection Method can be deleted.
E) Inspection Method can be changed with Engineering Change Management.
.
Answer: A, C, D
A,B) QS31 do not show plant when you create the Inspection Method, but when accessing in QS33 and QS34, the Plant field is present. To create an Inspection Method for a different plant, in QS31, enter the Plant field in the Reference Segment in the initial screen.
C) QS32 is to enter a different key date for the Inspection Method which the system will create the Inspection Method using the key date for a different Version.
D) QS35 is to delete an Inspection Method for a particular version.
E) QS32, QS33, QS34 do not have any field for Engineering Change Number.
Saturday, July 1, 2017
DNA Test Analysis of a Dedicated SAP Consultant
A recent DNA test result
of a dedicated SAP consultant
of a dedicated SAP consultant
